Guides

Close out every install: permits, inspections, registrations and supply-house bills

Track the permit, the inspection, the warranty registration, the rebate form and the supplier bill on every install until each one is done.

What it costs you

A heat pump goes in on Tuesday. The crew is packed up by four, the homeowner is happy, and on the board the job looks finished. Before you're paid in full and the file can close, though, someone still has to get the inspector out on the mechanical permit and make sure a person is home for it, register the equipment with the manufacturer, put the utility rebate paperwork together with the invoice and the cut sheets, and match the supply-house invoice for the unit, line set and pad against the job.

Every one of those runs on its own clock. Some manufacturers tie the longer warranty to registering within a set window after install. Miss it, and the homeowner is left with the shorter coverage, which you'll hear about the first time a compressor fails. Rebate paperwork wants a signature, model and serial numbers, and your invoice, so it rides around half finished in the truck because the homeowner was at work when you left.

For electricians, permits eat the week. You phone the inspections office, leave a message, and hear back while you're in an attic. What you get is a four-hour inspection window that takes a day off the schedule for a panel upgrade already wired and waiting. Fail the rough-in and there's a re-inspection: another window, another day the homeowner has to arrange to be home, another round of phone tag.

Then the supply-house bills arrive. Three invoices for one week, two jobs on one of them, and a return credit nobody applied. Until they're matched to the job, you can't say whether that install made money.

Do it yourself this week

  1. Open a closeout row for every install the day it's sold. One sheet, one row per job: address, homeowner, equipment model and serial, permit number, inspection status, registration deadline and date done, rebate status, and whether the supplier invoice is matched. A job with every cell filled is closed. Blank cells are the work.

  2. Look up the registration window when you order the equipment. Rules differ by brand and sometimes by product line, so check the manufacturer's site or ask your distributor rep, then write the deadline on the sheet and on your calendar. Register on install day if you can, while the data plate is in front of you.

  3. Photograph the data plate and the permit card at every install. Drop the photos into a folder named for the job. Registration, rebate forms and inspectors all ask for model and serial numbers, and nobody wants to drive back across town to read them off a condenser.

  4. Batch your calls to the inspections office. Pick one slot each morning to request inspections and check every open permit, instead of calling one at a time between jobs. Write down the window you're given, put it on the calendar, and text it to the homeowner within the hour. Unsure what a job needs inspected? Ask your local inspections office rather than guess.

  5. Get the rebate signature before you leave the driveway. Keep the rebate form filled in except for the signature, on a clipboard or tablet with the rest of the install paperwork. Read your utility's program page for what it wants attached, and add those items to the row as their own columns.

  6. Put a job name or PO on every supply-house order. Ask the counter to print it on the invoice. When the bill arrives, enter it in QuickBooks against that job the same week and mark it matched on the sheet. If an install is in and its invoice still hasn't shown up, call the supply house and ask for it.

  7. Work the open rows every Friday. Sort by the oldest open item and go down the list. Anything stuck more than a week gets a call or a text to whoever is holding it up, whether that's the inspector, the homeowner or the counter.

Where doing it by hand breaks down

The sheet holds up until installs stack three a week and closeout becomes something everybody will get to later. Registration deadlines hurt most, because nothing tells you that you missed one. Years on, a part fails and the claim comes back under the base warranty, and that's when the homeowner finds out.

Permit status lives in your head and in the inspector's voicemail. A re-inspection gets scheduled, the homeowner can't be home, it moves, and the new date makes it onto the calendar but not the sheet. Rebate forms wait on a homeowner who has stopped answering, since from their side the job is done. Supply-house invoices land in your inbox, in a paper stack on the counter and in an online portal, so matching them means having all three open at once on a Sunday night.

Each item is small. A dozen of them per install, each with a different person to chase and a different deadline, held together only by whoever remembers: that's what breaks.

How we'd automate it

Paperwork Chasing keeps every install's open items in one place with their deadlines attached, and when something stalls it chases the right person. That might be a note to the inspections office asking for a status or a date, a reminder to the homeowner about the rebate form still waiting on a signature, or a request to the supply house for the invoice that never came. You see what's open, what's due soon and what's overdue without opening five inboxes.

Bills to QuickBooks covers the supplier side. Supply-house invoices and parts receipts are picked up wherever they land and drafted into QuickBooks Online as bills against the job, for you or your bookkeeper to approve before they post.

To be plain about where the line sits: you're the licensed contractor, so you still pull the permit, sign, and submit. We track and chase. We don't file permits, register warranties or submit rebates for you, and we don't give code or permit advice; those questions go to your local inspections office.

All of it runs alongside the software you already use, inside accounts you own: QuickBooks Online, your email and calendar on Google Workspace or Microsoft 365, and your phone number. Nothing goes to a homeowner, an inspector or a supplier, and nothing posts to QuickBooks, except under the approval rules you set with us. Your records stay yours, and the AI step runs on your own AI subscription.

Talk it through

If you'd like to see how this fits your installs, book a free discovery call. You come away with a written plan for closing out jobs, whether or not you hire us to build it.

Written by Oak City Intelligence's AI writer and reviewed before publication.