Guides

Arrival updates that answer "where's my tech?" before anyone asks

Confirm the day before, text when the tech is on the way or running late, and check in after the job, so the 11:15 call never comes.

What it costs you

The homeowner was told "between 8 and 12." She took the morning off work, moved the dog to the back room and cleared a path to the furnace closet. At 11:15 nobody has shown up and nobody has said anything, so she calls the office.

Whoever answers doesn't know either. They call the tech. He is mid-repair at the house before hers, a water heater half drained and his hands wet, and he picks up anyway to say the last job ran long and he's about forty minutes out. The office calls her back with that news. She is not happy, and she now has to call her boss too.

One late arrival has cost four phone calls, an interrupted repair and a customer who is irritated before the van is in her driveway. Multiply that across a busy Monday and the person answering the phone spends half the morning relaying messages between trucks and kitchens.

Then the job gets done, the tech drives off, and nobody checks in. If the furnace short-cycles that night or the new valve weeps a little, the first you hear of it is an angry call the next morning and a callback on tomorrow's board, a truck roll you don't get paid for. The homeowner who would have happily left a good review never gets asked.

Do it yourself this week

  1. Confirm every appointment the afternoon before. Send each customer on tomorrow's schedule a short text from the shop's number: the day, the arrival window, the address, and a line asking them to reply if anything has changed. A wrong address or a forgotten appointment surfaces the night before, not when the tech is standing on an empty porch.

  2. Make the on-my-way text a rule, not a courtesy. If your field service software sends these, turn the feature on and check it fires for every tech. If it doesn't, give each tech a saved text on their phone: "Hi, this is [name] from [shop], on my way now, about [minutes] out." He sends it as he pulls away from the previous job.

  3. Send the running-late text the moment you know. The tech who can see a job running long tells the office, or texts the next customer directly, with a new estimate. Ten seconds of typing at the first sign of trouble saves the 11:15 call and the three calls behind it.

  4. Keep the day's list where the office can see it. A shared spreadsheet or your dispatch board, with a column for confirmed, on the way, running late and done. When a customer does call, whoever answers can read the status instead of phoning the truck.

  5. Check in the day after. Pick a time each morning to text yesterday's customers: is the heat still running, any drips, anything you want us to look at? A homeowner who mentions a noise at that point gets a quick visit, and the shop catches a problem before it turns into a callback.

  6. Ask for the review in the same message. When the check-in comes back happy, reply with a link to your review page. The customer is pleased right then, and a text from the shop that just fixed their heat gets read.

Where doing it by hand breaks down

Most of this depends on a tech sending a text while his attention is on a gas valve or a flooded basement. On the day it matters most, with every truck behind and the phones ringing, the running-late text is the first thing nobody sends. Software that sends an on-my-way text helps with the first message. But a text that fires when the tech leaves can't know the previous job ran long until somebody tells it, and it won't ask how the house is doing the next morning unless someone sets that up too.

The confirms and check-ins take an hour of somebody's day. In a shop where that somebody also answers the phone, books the jobs and chases payment, the check-in list slips on Tuesday and is forgotten by Thursday. Review requests go out in bursts when the owner remembers, then not at all for a month.

How we'd automate it

Every appointment gets a confirm text the afternoon before, from your own number, with the window you promised. When the tech leaves for the job, the customer gets an on-my-way text. If he says he's running late, by a quick text or a few words into his phone, the next customer hears it right away with the new time, and the office sees it too.

After the job comes the check-in: a text the next day asking if everything is still working. A reply that mentions a problem goes straight to you or the office so someone can get back to that homeowner the same morning. A happy reply gets the review request.

Some field service software already sends the on-my-way text, and if yours does, we leave it alone and fill the gaps around it: the running-late message, the day-after check-in, the review request. It works alongside the software you already run, using your phone number, your email and your calendar. Every message runs on rules you set with us; anything outside those rules waits for you to approve before a customer sees it. Your records stay in accounts you own, and the AI step runs on your own AI subscription.

At 11:15 the homeowner already knows the tech is forty minutes out, because he told her at 10:50.

Talk it through

If your office spends its mornings answering "where's my tech?", book a free discovery call. We walk through how your day gets scheduled and run, and you leave with a written plan whether or not you hire us.

Written by Oak City Intelligence's AI writer and reviewed before publication.